Sceptre Technologies X37 specifications Problems Possible solutions, Page81

Problems	Possible solutions
	Change the signal line to other input-end; make sure your
Can not receive UHF
	antenna is capable of receiving UHF.
Can not receive
	Please use the channel scanning function to increase the number
sufficient channels
	of channels.
through antenna
	Please adjust the color setup, and make sure your signal cable is
No colors
	tightly connected.
Blinking picture
accompanied	Check the connection of antenna/signal cable.
by signal box image
Broken lines or	Adjust antenna. Keep the TV away from noise sources such as
segments	neon lights, and hair dryer.
Certain TV channels
	Please use the channel scanning function or v-chip function to
are
	unblock.
blocked
	￿Make sure your Picture is both on “User Mode” by pressing the
Can not access a
	“Picture” button until the upper left hand corner says
picture menu
	“User Mode”.
	This television is designed with SONY television universal
Universal Remote Code
	remote codes.
	￿This is a big LCD screen, it takes time for electricity to charge
	up to power the screen and takes time for the large screen to
	deplete all its residual electricity.
TV has lines of colors	￿Please do not turn the TV on and off really quickly.
across the screen	￿Between the time which you turn off the TV and the time
	which you turn it on, there should be at least 50 seconds to 70
	seconds.
SCEPTRE X37	Page81