Sceptre Technologies X320BV-HD TV Channels are, Blocked, Universal, Remote Code, TV Turns on, Vga

Problems	Solutions
TV CHANNELS ARE	Check your auto lock function’s settings inside the OSD. You
BLOCKED	may have locked up some channels but forgot about them.
	Refer to page 34 for more instructions.
UNIVERSAL	This TV follows SONY’s universal remote code. Please check
REMOTE CODE	your hand book for SONY’s codes then apply them.
THE TV TURNS ON	This TV is a High Definition liquid crystal display panel TV. It
OR OFF SLOWLY	requires a few more seconds than normal TVs to power up and
AND THE SCREEN	show the picture.
SHOWS UP
SLOWLY
NO SOUND ON PC	Make sure you have a 3.5 mm mini-jack cable connected from
	your pc’s sound output to the TV’s VGA STEREO INPUT.
HDCP VIDEO SAYS	Reboot your HDCP video device but turning them off and
NO HDCP SUPPORT	unplugging the power cord. Wait up to 8 minutes to plug the
	power back in to see if it works or not.
	Make sure you have a 3.5 mm mini-jack cable connected from
HDCP VIDEO HAS	your HDCP video device’s sound output to the TV’s VGA
NO AUDIO	STEREO INPUT. If your HDCP video device uses RCA AUDIO
	jacks, you’ll need to obtain a RCA audio converted into 3.5 mm
	mini-jack cable.
CANNOT GET	Make sure the TV is recognized as plug and play monitor. Try
1360X768 ON PC	updating your video card’s drivers as well. If that does not help,
VGA	most likely you’ll need to upgrade your video card to a newer
	one.
PICTURE IS	This might be from interference from large electrical appliances,
DISTORTED OR	cars, motorcycles, or fluorescent lights. If the TV is close to the
HAS ABNORMAL	wall, try moving the TV to another room in your house to see if
SOUND	the problem still occurs.
	If you’re using HDMI or a TV digital channel make sure you use
	the ASPECT button to switch to 16:9 format. If you are using
PICTURE DOES	VGA, use the AUTO ADJUST function to adjust to the screen.
	Please Note : If you are using regular analog TV, AV, or
NOT COVER THE	component in 480i resolution, use the ASPECT button to switch
ENTIRE SCREEN	to 16:9 in order to fill up the screen. Please Note : This note
	this feature will distort the picture.
	For best image quality, view HD widescreen programs where
PICTURE QUALITY	possible. If HD content is not available view “Standard
	Definition” from a digital source. Standard, analog TV will
IS HORRIBLE!!	always be noticeable inferior to HD because your TV has video
	that is many times better than old TV’s and so you can see
	interference and deficiencies you did not KNOW you had.
PICTURE HAS	Your TV is manufactured using an extremely high level of
PIXELS THAT ARE	precision technology, however, sometimes some pixels of your
ALWAYS	TV may not display. Pixels defects within industry specifications
DISPLAYING THE	are inherent to this type of product and do not constitute a
SAME COLOR	defective product.
I CANNOT CHANGE	Your TV syncs time automatically according to your local TV
THE TIME	channel. This function only works while the TV’s tuner is
MANUALLY	connected to an ANTENNA.
BIG BLACK BOX IN	You have turned on closed captioning and are using TEXT1 –
THE MIDDLE OF	TEXT4. Change the setting to CC1 or turn off closed captioning
SCREEN	and the box will disappear. Refer to page 40 for more
	information.

- 47 -

www.SCEPTRE.com

SCEPTRE X320BV-HD HDTV User Manual