Attaching or Removing the Stand
1.Place the display unit flat on a table. Afterwards attach the plastic base onto the neck by form fitting the circular hole. Remember the plastic base should have more area facing the front of the neck. Fit the metal plate onto the bottom of the base by matching the 3 holes. Screw in the 4 thick threaded screws to secure the metal plate to the plastic base. The stand installation is now complete.
To install or remove the stand, screw in or remove the 4 screws indicated in the picture and the stand will come off.
- 8 -
www.SCEPTRE.com
QUASAR SQ3200* User Manual