Sceptre Technologies x32 user manual

SCEPTRE X32 HDTV User Manual

4.Connect the red color connector to both your set-top box and Composite 1’s red connector port off the back of your X32 LCD HDTV.

5.Turn on the X32 LCD HDTV and your set-top box.

6.Use the remote control’s source button or the source button on the right side of the TV to switch to AV1 (CVBS).

Please Note :

•If Composite 1 is already occupied, please use Composite 2 as your connection port and switch source to AV2 (CVBS).

•Make sure the yellow connector in the same group is not connected. You can only connect either the S-Video port or the Yellow Connector port. DO NOT CONNECT BOTH.

•Please reference the set-top box’s manual as well, to make sure the set-top box is configured to output correctly to the TV.

•Sceptre’s X32 LCD HDTV supports SONY’s universal remote code. Please look up SONY’s codes in your universal remote’s hand book.

- 34 -

www.SCEPTRE.com