Sceptre Technologies E320BV-FHD Installing Batteries to the Remote Control, Please Note

audio. This connection shares audio red / white jacks with YPbPr.

8.Analog Audio Out – This connection is for connecting to analog audio receivers.

9.USB – USB connects to USB flash drives for playing music and picture. The USB port is also used for updating the TV’s firmware.

10.SPDIF - This connection port is used for sending out digital audio signals to digital surround sound receivers. The orange (COAX SPDIF OUT) connector sends out either bit-stream or PCM digital sound signal to a home theater receiver with digital coax input.

11.HEADPHONE – This connection is for headphones to be attached to the TV.

Please Note:

•This TV features a power saving function which will turn off the TV automatically after 10 minutes of idling on a connection with no signal. This feature is present on all connection.

Installing Batteries to the Remote Control

Please insert the AAA batteries into the remote control. Make sure the (+) side and the (-) side are installed correctly. When you are installing the battery, the remote’s backside should be facing up. Afterwards, re-attach the battery cover.

Please note:

•Only use AAA batteries.

•Inserting the batteries incorrectly may also result in cracking or leakage that may pose a fire risk or lead to personal injury.

•Dispose the batteries in accordance with local laws and regulations.

•Keep the batteries away from children and pets.

•If the remote control is not used for a long time, remove the batteries.

•Keep the remote control away from moisture, sunlight, and high temperatures.

- 13 -

www.SCEPTRE.com

SCEPTRE E320BV-FHD HDTV User Manual