Sceptre Technologies E320BV-FHD Switching a, Channel or, Source Changes, Volume, Trash Pixels on

Problems	Solutions
SWITCHING A	Different channels and inputs will sometimes have this effect
CHANNEL OR	because the channel signal’s own volume is already loud.
SOURCE CHANGES	There is no way remove this completely. The TV has an
THE VOLUME	AUTO VOLUME LEVEL function that can combat this type of
	effect. Please make sure that function is turned on.
THERE IS NOISE OR	When your TV’s resolution is higher than the digital channel’s
TRASH PIXELS ON	broadcast resolution, the signal is up-converted to match your
THE SCREEN	TV’s resolution. Up-converting can cause this type of effect.
TIPS FOR HIGH	The TV is an ideal platform for viewing High Definition
DEFINITION USERS	Content. The best image quality can be achieved by HDMI,
	YPbPr (Component), then VGA. However, due to variances in
	broadcast practices, it is possible some image distortions can
	occur.
TIPS FOR	Letterboxed (Widescreen) versions of DVD movies are most
LETTERBOX	commonly formatted for standard 4:3 TVs. The TV has the
CONTENT USERS	capability of expanding this content so the entire screen is
	filled at the expense of the image proportion. To use this
	function press the aspect button on the remote control and
	cycle among the available options.
I CANNOT FIND THE	The buttons are represented by the ▲▼◄► buttons located
VOLUME AND	on the remote control. ▲▼ changes the channels and ◄►
CHANNEL	changes the volume.
CHANGING
BUTTONS
TV TURNS OFF	The TV features a power saving mode which will automatically
AUTOMATICALLY	turn off the TV, if there’s no signal provided for more than 5
AFTER 5 MINUTES	minutes.

- 48 -

www.SCEPTRE.com

SCEPTRE E320BV-FHD HDTV User Manual