If You Have VGA Connection on Your Video Card…
1.Make sure the power of E246 LCD MONITOR is turned off.
2.If you were previously using a CRT (bulky) monitor, please hook up your old monitor first and make sure your refresh rate is set to 60 Hz frequency before using the E246 LCD MONITOR. You can find the refresh rate information and change it by RIGHT CLICKING on the desktop with nothing selected. After you have right clicked, select the PROPERTIES option. Click on the SETTINGS tab. Click on the ADVANCED button. Click on the MONITOR tab. In that tab, change the refresh rate to 60Hz and click on APPLY. After the refresh rate changed, please shut down the computer and monitor.
3.Obtain the VGA cable and connect to the VGA connection on your PC. Connect the other end of the cable to your E246 LCD MONITOR.
4.Turn on the power of both the E246 LCD MONITOR and the PC.
Please Note :
∙The PC’s clearest picture is produced under 1920x1080 at 60Hz.
Page14 | SCEPTRE E246 |