Sceptre Technologies E246 manual Manual Image Adjust

MANUAL IMAGE ADJUST

This function adjusts the image of the monitor.

1.Press [1] to open the OSD then highlight MANUAL IMAGE ADJUST by pressing the ▲ or ▼ buttons.

2.Press [2] to enter the function.

3.Press the ▲ or ▼ buttons to select the option you want to adjust and press [2] to enter the option.

4.Use the ▲ or ▼ buttons to adjust the values.

a.HORIZONTAL SIZE – This option expands or contracts the image horizontally.

b.H./V. POSITION – This option moves the image left, right, up, or down.

c.FINE TUNE – This option adjusts the picture clarity by adjusting data / clock of your signal.

d.SHARPNESS – This option adjusts the sharpness of the signal.

e.VIDEO MODE ADJUST – This option adjusts the various scaling of video.

i.FULL SCREEN – This mode stretches anything to full screen.

ii.OVER SCREEN – This mode is for watching TV where it will perform overscan for most TV videos.

iii.ASPECT RATIO – This mode maintains the aspect ratio of the resolution. This function is unavailable for switching between 16:9 and 16:10 signals..

f.OPTICOLOR MODE – This option lets you select various preset color modes.

i.STANDARD – This mode is for general use.

ii.GAME – This mode is for playing games.

iii.CINEMA – This mode is for watching movies.

iv.SCENERY – This mode is for looking at pictures.

v.TEXT – This mode is for reading or writing text.

Please Note:

∙Always use auto adjust first to adjust the image.

Page20 SCEPTRE E246