Sceptre Technologies E32 user manual Safety Instructions

Page 4

SAFETY INSTRUCTIONS

This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display. Keep these instructions in a safe place for future reference.

To avoid the risk of electric shock or component damage, switch off the power before connecting other components to the TV.

Unplug the power cord before cleaning the TV. Please use the included custom bezel cleaning cloth for cleaning the bezel of the TV only. Do not use a liquid or a spray cleaner for cleaning the product. Do not use abrasive cleaners.

Always use the accessories recommended by the manufacturer to insure compatibility.

When moving the TV from an area of low temperature to an area of high temperature, condensation may form on the housing. Do not turn on the TV immediately after this to avoid causing fire, electric shock or component damage.

Do not place the TV on an unstable cart, stand, or table. If the TV falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the TV.

Any heat source should maintain a distance of at least 5 feet away from the TV, i.e. radiator, heater, oven, amplifier etc. Do not install the product too close to anything that produces smoke or moisture. Operating the product close to smoke or moisture may cause fire or electric shock.

Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable

operation of the TV and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the TV in a bookcase or cabinet unless proper ventilation is provided.

Never push any object into the ventilation slots of the TV. Do not place any objects on the top of the Product. It could short circuit parts causing a fire or electric shock. Never spill liquids on the TV.

Do not use the TV in a portrait format (by rotating 90 degrees) under high temperature environment (25°C or higher), since this would retard heat dissipation and would eventually damage the TV.

The TV should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

The power cable must be replaced when using different voltage from that specified in the User Manual. For more information, contact your dealer.

The TV is equipped with a three- pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.

- 4 -

www.SCEPTRE.com

SCEPTRE E32 HDTV User Manual

Image 4
Contents Dear Sceptre Customer Important Information Safety Instructions Safety Instructions Page Television Antenna Connection Protection External Television Antenna GroundingInstallation Package ContentsOpening the Package Attaching or Removing the Stand Table of Contents Front View Identifying Front and Rear PanelRear View Mounting Pattern Side Control Buttons Rear View Connections Please Note Sceptre E32 Remote Control DVD Function Buttons Not used Installing Batteries to the Remote Control Connection Suggestions If You Have Digital Cable without Cable Box or Antenna…Connecting DVD Player with Component YPbPr… Connecting Wii with Composite… HdtvConnecting Cable or Satellite boxes with HDMI… Connecting to a PC with VGA and 3.5 mm minijack … Connecting a Digital Audio Receiver with Coax SPDIF… Switching Sources Starting up the Hdtv Ready to Watch Some TV?If You’ve Connected Antenna or Cable to the TV… OSD On Screen Display Controls Via Remote ControlVia TV Side Panel Buttons OSD On Screen Display Options PicturePicture Settings III. PC SettingsAdvance Picture Settings Sound Settings SoundOther Settings III. Channel Setting ChannelParental Setup III. Clock Others Detailed Explanations USB Connection ExplainedMedia Setting Closed Captioning digital and analog Explained Rating ExplainedMpaa Aspect Ratio Explained NormalShortcuts to Browsing Channels To ADD to the Favorite ListDVD Operation IntroductionImportant DVD Operation Guidelines DVD control buttons are show in the picture below General Setup Audio Setup Preferences How do I clean the TV ? Cleaning the bezel and remote controlTroubleshooting TV Channels are BlockedUniversal Remote CodeSwitching a VolumeContent Users Channel orCall Us If You Need Help Specification Illustration4NTSC/ATSC Limited Product Warranty Warranty Service Disclaimer, Trademarks, & Copyright Information FCC Compliance Statement European Notice
Related manuals
Manual 58 pages 26.43 Kb Manual 54 pages 35.08 Kb