Sceptre Technologies E32 Switching a, Channel or, Source Changes, Volume, There is Noise or

Problems

Solutions

SWITCHING A

Different channels and inputs will sometimes have this effect

CHANNEL OR

because the channel signal’s own volume is already loud.

SOURCE CHANGES

There is no way remove this completely. The TV has an

THE VOLUME

AUTO VOLUME LEVEL function that can combat this type of

effect. Please make sure that function is turned on.

THERE IS NOISE OR

When your TV’s resolution is higher than the digital channel’s

TRASH PIXELS ON

broadcast resolution, the signal is up-converted to match your

THE SCREEN

TV’s resolution. Up-converting can cause this type of effect.

TIPS FOR HIGH

The TV is an ideal platform for viewing High Definition

DEFINITION USERS

Content. The best image quality can be achieved by HDMI,

YPbPr (Component), then VGA. However, due to variances in

broadcast practices, it is possible some image distortions can

occur.

TIPS FOR

Letterboxed (Widescreen) versions of DVD movies are most

LETTERBOX

commonly formatted for standard 4:3 TVs. The TV has the

CONTENT USERS

capability of expanding this content so the entire screen is

filled at the expense of the image proportion. To use this

function press the aspect button on the remote control and

cycle among the available options.

I CANNOT FIND THE

The buttons are represented by the ▲▼◄► buttons located

VOLUME AND

on the remote control. ▲▼ changes the channels and ◄►

CHANNEL

changes the volume.

CHANGING

BUTTONS

TV TURNS OFF

The TV features a power saving mode which will automatically

AUTOMATICALLY

turn off the TV, if there’s no signal provided for more than 10

AFTER 10 MINUTES

minutes.

MY TV PICTURE IS

Check to see if you are under POWER SAVING mode for your

VERY DIM

picture mode. Keep pressing the PICTURE button on the

remote control to cycle out of POWER SAVING.