Sceptre Technologies E245BD-FHDU user manual Rear View Connections

Rear View Connections

1.HEADPHONE – This connection is for headphones to be attached to the TV.

2.TV – This connection is for digital or analog cable without the cable box or over-the-airwave antennas. The tuner is a hybrid tuner that tunes to both analog and digital channels. This connection uses coaxial RF cable. For over-the airwave digital stations please check http://www.antennaweb.org.

3.VGA - This connection port connects to a PC for video using VGA cable. Be sure to connect your audio cable to the VGA Stereo input if you want sound out of VGA video source.

4.Audio In - This connection port is for people who want to provide audio to the TV when using a PC or a DVI video device. The sources use 3.5mm mini-jack audio cable.

5.Video – Video connects to devices that use composite video cables such as VCR or DVD player or Wii™. Connect the yellow for video and the red / white for audio. This connection shares audio red / white jacks with YPbPr.

6.HDMI1 – HDMI connects to devices that use HDMI cable, such as Blu-ray or HD DVD player, or HD cable / satellite set-top box. This connection port receives pure digital audio and high definition signal through one single cable. This port also can accept a HDCP video device for video.

7.USB – USB connects to USB flash drives for playing music and picture. The USB port is also used for updating the TV’s firmware.

8.SPDIF - This connection port is used for sending out digital audio signals to

- 12 -

www.SCEPTRE.com

SCEPTRE E245 Series LED HDTV User Manual