Blodgett SC-10E, SC-7E manual Troubleshooting Problem, Possible Causes

6.0 TROUBLESHOOTING

PROBLEM

Cold water flows continuously into drain when steamer is OFF.

Water overflowing into cooking compartment.

Heater elements do not come on.

POSSIBLE CAUSES

Either or both solenoid valves are not closing. Contact your authorized service agency to repair or replace solenoid valves.

Problem with operating probe caused by either:

1.Short between probe terminal and body of steamer. Contact your authorized service agency.

2.Excessive scale build-up on probe. Contact your authorized service agency. Have water quality analyzed and corrected immediately to avoid damage to steamer.

1.Problem with contactors or thermostat coated with scalant. Contact your authorized service agency. Have water quality analyzed and corrected immediately to avoid damage to steamer.

16