*EC 4004 ENGL. 14.12.1999 9:56 Uhr Seite 5
TechniSat EC 4004
2. Safety instructions
For your own protection carefully read the safety precautions befo- re starting to use your new device.
The manufacturer is not liable to damage caused by improper handling or by disregarding the safety precautions.
Take care that empty remote control batteries are not put into the household waste but disposed off properly (return to specialist sto- res, special waste)
Styrofoam packing harmful to the environment has not been used.The packing which can be recycled corresponds to the requirements of the new packing regulations.
Never open the device. There is danger of an electric shock. Repairs should only be carried out by qualified specialists.
Heating and ventilation: The housing cover contains slots for the required ventilation which are not to be covered during operation.Do not use the device near heatings, stoves or other heat sources.
Water and humidity: Protect your device against liquids and do not use it in rooms with high air humidity.
Power supply:Only connect the device to power sources indicated on the device or in the operating instructions.
Cleaning:Before cleaning the device unplug the connector and use a moi- stened cloth.
Operation interruption: During a storm or when operation is interrupted for a long time dis- connect the device from mains.
In the following cases disconnect the device from mains and ask a specialist for help:
-the power supply cord or the connector are damaged
-the device was exposed to humidity or a liquid has flown into the device
-in case of considerable malfunctions
-in case of considerable external damage.
5