*EC 4004 ENGL. 14.12.1999 9:56 Uhr Seite 8
TechniSat EC 4004
4. Operation
4.1 General
4.1.1 Switching on and off
After being turned on,the receiver reselects the channel which was set before the device has been switched off. Yet, if in the meantime the power supply has been interrupted, the device selects channel 1 upon powering up.
STANDBY
>switch on and off with 
or 
or
>switch on with
4.1.2 Channel selection
>with
>7 8
>3 (wait 4 s)
>0 3
>with
on remote control or 
on receiver
4.1.3 Volume
VOL
>with
>with
lower higher
VOL
MUTE
>turn off with
4.1.4 Mono/stereo
M/ST
>select 
to switch between mono
>and stereo
4.2 D/D2 MAC reception
The reception of MAC channels is indicated by the second display element with a c.The following displays iden- tify the different screen formats:
>screen format 4:3
>screen format 16:9
4.2.1 Colour intensity
8