TechniSat DigiBox VIACCESS instruction manual Switching DiSEqC on or off, Additional Settings

Page 16

The following selections can be made in this sub-menu:

5.4.1 Switching DiSEqC on or off

DiSEqC (Digital Satellite Equipment Control) is a digital signal that can control the functions of DiSEqC-compatible components via the antenna connection.

If your external installation features DiSEqC components, you should enable the DiSEqC control function:

>When this entry is highlighted, use the OK key to switch the DiSEqC function on or off.

5.4.2 Adjusting the Switching Matrix and LNB Properties

The menu reflects the four switching criteria of the DiSEqC control.

Your receiver is pre-programmed to receive ASTRA broadcasts on switch setting A/A, and EUTELSAT signals on setting B/A of a Multiswitch. Should the switching matrix of your exter- nal receiving unit be set up differently, or should you wish to receive satellite signals other than those mentioned, you can adjust the receiver settings as follows:

>Use the up/down arrow keys to select the DiSEqC switch position (1-4) that you wish to use for allocation to a satellite (e.g. A/B 3 No Satellite), and highlight the appropriate entry.

>Press the OK key to confirm.

A list of several satellites will be displayed, from which you can make your selection.

>Use the up/down arrow keys to select the appropriate satellite.

Pressing the up/down arrow keys will move the marker by one line at a time, up or down, while the left/right arrow keys will take you to the previous or following pages respectively.

Should the satellite you are looking for not be included in the list, please select one of the spare settings, which are marked User 1 to User 15.

>Confirm by pressing the OK key.

The highlighted entry will now be inserted in the Menu >Settings>LNB at the pre-

viously selected position

In this way, you can continue to customise the Menu>Settings>LNB until all the informa-

tion in this menu correspond to those of your receiving unit. For those switiching criteria you do not require you should select the setting No Satellite.

5.4.3 Additional Settings

Now that the switching matrix of your DVB receiver has been adjusted to conform to your external reception equipment, you should also check on the other settings for your receiving equipment, and adjust the settings where necessary.

>Use the left/right arrow keys to mark the entry Check LNB.

>Using the up/down arrow keys to move around the field Check LNB, select the satellite position (1-4) that you wish to adjust resp. check on; mark the entry Pro- ceed in blue.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents DigiBox Viaccess Remote control MONO1/MONO2Contents Page Al antenna Please read this first Important hints on UsageSafety Instructions Equipment not in useConnecting a DVB receiver to a satellite installation External Installation ConnectionsMains connection Connection to a Television setSetting the UHF Output Channel Video Cassette Recorders VCR Super VHS Video Cassette RecordersAmplifier Serial Interface RSBasic Settings InstallationOSD Language Audio/Video Settings Parental lockGMT Time Offset hrs CountryScreen Format TV Adjustments for the External Unit SubtitelAdjusting the Switching Matrix and LNB Properties Switching DiSEqC on or offAdditional Settings Poor reception, digital reception not possible Operation Switching on and off Using the Programme up/down keysUsing the Numeric Key Pad Using the Programme ListAdjusting sound volume Reception of scrambled encrypted ProgrammesSelecting a different language Selecting blocked programmesTV/Radio selection Return to previous programme selectedDisplaying Time and Programme Information Additional Programme InformationNow Display of current programme contents Electronic Programme GuideEPG functions allow you to Entering EPG dataNext PreviewActivate VCR Timer mode EPG FunctionsEPG Information Preselect ProgrammesDisabling the timer function EPG SurveyEPG Search Programme TypeProgramming the Timer Timer on Changing the Basic Programming VCRAdding/Deleting Channels Sorting Channels Adding items to the User Channel ListDeleting items from the User List Deleting items from the Total ListChange PIN Locking ChannelsProgramming the Electronic Programme Guide Please Note Unblocking the parental lock for individual channels Programme SearchPage Page Activate factory settings/change data channels Page System Configuration Embedded ViaccessTechnical Terms Software update LNB/LNC Low Noise Block converterMode Modulation at 22 KHzTransponder Universal LNBTechnical Data LNB power supply TimerRemote Control System RC-5 Serial Interface RSTroubleshooting Guide Power supply Mains switch Power usageProblem Possible Cause Solution Mains voltage90900 Summary for everyday use Switching on and off Volume adjustmentUsing the up/down arrow keys Using the programme/channel list

DigiBox VIACCESS specifications

The TechniSat DigiBox VIACCESS stands out as a formidable option for enthusiasts seeking a robust digital satellite receiver. Designed to cater to the needs of both casual viewers and tech-savvy individuals, this device seamlessly combines advanced features with user-friendly functionality.

One of the main attractions of the DigiBox VIACCESS is its support for the VIACCESS encryption system, which is compatible with a wide range of satellite TV services. This ensures that users can access numerous channels and content without fear of interruptions. The receiver supports both standard-definition (SD) and high-definition (HD) broadcasting, providing crystal-clear picture quality that enhances the viewing experience.

Equipped with a powerful processor, the DigiBox offers quick channel switching and smooth navigation through menus. This responsiveness is complemented by its support for various multimedia formats, enabling users to playback music, photos, and videos directly from USB devices or external storage options. The built-in media player is a significant advantage, making it a versatile addition to any home entertainment setup.

The receiver includes multiple connectivity options, such as HDMI and SCART outputs, which allow for easy integration with televisions and home theater systems. Additionally, the DigiBox features a built-in Ethernet port, enabling users to connect to the internet for accessing on-demand services and applications. This internet capability adds a layer of versatility, allowing viewers to explore a broader array of content.

Another noteworthy characteristic of the TechniSat DigiBox VIACCESS is its Electronic Program Guide (EPG). This feature simplifies the process of finding and scheduling recordings, ensuring that users never miss their favorite shows. The device also supports various programming features, including timer recordings, which can be set easily via the intuitive interface.

Moreover, the DigiBox is designed for ease of use. With a straightforward remote control, navigating through channels and settings is a breeze. The user interface is clean and accessible, making it suitable for all age groups.

In addition to its hardware capabilities, TechniSat is known for providing regular firmware updates. This commitment to software maintenance ensures that the DigiBox remains compatible with evolving broadcasting standards and user requirements.

In conclusion, the TechniSat DigiBox VIACCESS is an excellent choice for anyone looking to enhance their satellite TV experience. With its support for leading encryption standards, diverse connectivity options, and user-friendly features, it successfully bridges the gap between traditional television and modern multimedia needs.
Top Page Image Contents