Ace Hardware 3003530 (AC-6168) manual Tune Settings

Page 4

Tune Settings

Your wireless chime has different selectable tunes: Ding (one note), Ding- Dong (two note), or Westminster (eight note) (Available on selected chimes). The factory setting is for the Ding-Dong tune (or Westminster, when avail- able). This tune can be changed by following the instructions below.

Ding (one note tune)

Transmitter: Add a jumper to location 8.

Ding-Dong(two note tune)

Transmitter: Remove jumper from location 8.

Chime: Remove jumper from location 8.

Westminster (Eight note tune) (Available on selected chimes) Transmitter: Remove jumper from location 8.

Chime: Add a jumper to location 8.

Note: All models have both front and back door tune capabilities. You may purchase any ACE® wireless push button for a second entrance.

Remove screw to open access door

Back of

Transmitter Battery Replacement

Install an alkaline type A23 12 Volt bat- tery. See diagram inside push button for correct battery orientation.

Chime 12345678

Tune Setting (Not used on all models)

12345678

Inside

Transmitter

*Code Settings 1-7 Must Match Both Transmitter and Chime

Tune Setting

Note: Some models might re- quire the use of tweezers to re- move and replace the jumpers.

-4-

598-1073-02

Image 4
Contents Wireless Door Sensor Chime Model 3003530 AC-6168Installation Code and Tune Settings Code SettingsTune Settings Troubleshooting Technical ServiceRegulatory Information Do Not Send ProductsFive Year Limited Warranty 598-1073-02 598-1073-02