ITT DVD 10-101DX Audio Setup, Audio OUT, Video Setup Brightness, Contrast, Hue, Saturation

AUDIO SETUP

AUDIO SETUP

AUDIO OUT	SPDIF/OFF
	SPDIF/RAW
	SPDIF/PCM

EXIT SETUP

AUDIO OUT

Highlight the AUDIO OUT option, and press the Arrow buttons to choose the audio output mode you prefer. Press Enter to confirm; There are 3 optional audio output modes: SPDIF/OFF, SPDIF / RAW, and SPDIF/ PCM.

SPDIF/OFF, SPDIF / RAW, and SPDIF/ PCM. SPDIF/OFF: From the Coaxial Output jack and the

Optical Output jack, no signal is output.

SPDIF/ RAW: Choose this setting if your DVD player is connected to a power amplifier with a coaxial cable or an optical cable; When playing a disc recorded with Dolby Digital, DTS and MPEG audio formats, the corresponding digital signals will be output from the Coaxial Output jack or Optical Output jack. This player’s digital output jacks are designed for a connection to a Dolby Digital, DTS, or MPEG receiver or decoder.

SPDIF / PCM: Choose this setting if your DVD player is connected to a 2-channel digital stereo amplifier; When playing a disc recorded with Dolby Digital and MPEG audio formats, audio signals will be modulated into a 2-channel PCM signal, and it will be output from the Coaxial Output jack or Optical Output jack.

VIDEO SETUP

		BRIGHTNESS
		Use the Up and Down arrow button to move the scroll
VIDEO SETUP
		and adjust the brightness.
BRIGHTNESS
		CONTRAST
		Use the Up and Down arrow button to move the scroll
		and adjust the contrast
CONTRAST		HUE
HUE		Use the Up and Down arrow button to move the scroll
SATURATION		and adjust the hue
EXIT SETUP
		SATURATION
		Use the Up and Down arrow button to move the scroll
SPEAKER SETUP		and adjust the saturation
		DOWNMIX
		Use the Up and Down arrow button to move the scroll
		and adjust the saturation.
SPEAKER SETUP
		LT / RT: Choose this setting; it will be sound like in a
DOWNMIX	LT/RT
		movie theatre if the original movie the disc was recorded
	STEREO
	VSS	from was encoded in the Pro Logic Dolby Digital format.
EXIT SETUP		STEREO: Choose this setting, when 5.1-channel
		sound playing, two channels of signals will be output
		from the left and right soundtrack; when 2-channel sound
		playing, stereo signal will be output.
		VSS: Choose this setting, when a disc recorded with
		5.1-channel sound format playing, the fictitious surround
		soundtracks effect will be heard from the main
		soundtrack.

GB- 10