Chapter 2 | Basic Operations |
Playing DVD, CD or VCD
Follow these steps to play a DVD, CD or VCD disc:
1.Turn on the TV.
2.Set the TV to the AV input connected to the player.
3.Turn down the volume on your amplifier and then power it on.
4.Set the amplifier to the AV input connected to the player.
5.Turn on the POWER button on the back panel.
6.Press OPEN/CLOSE on the remote control or front panel to open the disc tray.
7.Place the disc in the tray with the label side facing up and playback side facing down. If the disc has two sides, place the disc with the desired label facing up.
8.Press OPEN/CLOSE again to close the disc tray.
9.Press PLAY on the remote control or front panel. Many discs will load and begin playing automatically when the disc tray is closed. If the DVD has a disc menu, or more than one title, the disc menu may appear.
10.Adjust the volume of the player by pressing the VOLUME button on the remote control.
Additional Disc Playback Options
1.To freeze playback, press PAUSE/STEP.
2.To resume normal playback, press PLAY.
3. | To go to the next or previous chapter/track, press NEXT or PREV |
4. | To scan forward or backward at variable speeds during playback, press F.FWD or F.REW |
| repeatedly. |
5.To stop playback, press STOP once. To resume playback from the same place on the disc, press PLAY.
6.To stop playback completely and restart the disc, press STOP twice. To restart the disc, press PLAY.
GB- 7