BN68-00457B-01_ENG 2003.10.23 3:20 PM Page 18

Installing the Display Vertically

ENG

You can install the PDP vertically. (PPM42S3/50H3/63H3 models are available. Other manufacturers do not guarantee a reliably working.) In this case, the fan automatically works. If you wish to stop the fan, position the PDP horizontally and then set “Selectable Fan” to “Off” in the “Function” menu.

Please use the wall attachment panel exclusively when installing vertically. And you have to put left side of the PDP on top when viewed from front.

Before Using the Video Wall and the Multiple Display Contol function

Example for 2x2 Video Wall function

1Please create ID for each PDP before installing them close together. It may be difficult to create IDs when operating the remote control for PDPs that are installed close to each other.

2Press the MDC button on the remote control. Select ID input on the menu. Use the numeric buttons to enter the ID for PDP adjustment.

You can operate the remote control only for the PDP that has been selected.

Example for Multiple Display Control connections

For details about Video Wall configuration

 

and operation, refer to “Setting the Multiple

Screen” on page 33.

For details about Multiple Display Control, refer to “Setting the MDC (Multiple Display Control)” on page 31 and the Help section in MDC program CD.

18

Page 18
Image 18
Samsung PPM 42S3 manual Installing the Display Vertically, Example for 2x2 Video Wall function