3
ENG
Important Safety Informations (UL1492)
◆Read all safety and operating instructions before operating your PDP.
◆Keep the safety and operating instructions for future reference.
◆Heed all warnings on the PDP and in the operating instructions.
◆Follow all operating and use instructions.
◆Unplug the PDP from the wall outlet before cleaning. Use a damp cloth; do not use liquid or aerosol
cleaners.
◆Never add any attachments and/or equipment without approval of the manufacturer. Such additions
can increase the risk of fire, electric shock, or other personal injury.
◆Do not use the PDP where contact with or immersion in water is a possibility, such as near bath tubs,
sinks, washing machines, swimming pools, etc.
◆Do not place the PDP on an unstable cart, stand, tripod, bracket, table, or
floor where it can fall. A falling PDP can cause serious injury to a child or
adult, and serious damage to the appliance. Use only with a cart, stand,
tripod, bracket, or table recommended by the manufacturer or sold with
the PDP. Follow the manufacturer's instructions when mounting the unit,
and use a mounting accessory recommended by the manufacturer. Move
the PDP and cart with care. Quick stops, excessive force, and uneven
surfaces can make the unit and cart unsteady and likely to overturn.
◆Provide ventilation for the PDP. The unit is designed with slots in the cabinet for ventilation to protect
it from overheating. Do not block these openings with any object, and do not place the PDP on a
bed, sofa, rug, or other similar surface. Do not place it near a radiator or heat register. If you place the
PDP on a rack or bookcase, ensure that there is adequate ventilation and that you've followed the
manufacturer's instructions for mounting.
◆Operate your PDP only from the type of power source indicated on the marking label. If you are not
sure of the type of power supplied to your home, consult your appliance dealer or local power com
pany.
◆Use only a grounded or polarized outlet. For your safety, this PDP is equipped with a polarized
alternating current line plug having one blade wider than the other. This plug will fit into the power
outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If
the plug still does not fit, contact your electrician to replace your outlet.
◆Protect the power cord. Power supply cords should be routed so that they won’t be walked on or
pinched by objects placed on or against them. Pay particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the unit.
◆Unplug the PDP from the wall outlet and disconnect the antenna or cable system during a lightning
storm or when left unattended and unused for long periods of time. This will prevent damage to the
unit due to lightning and power-line surges.
BN68-00457B-01_ENG 2003.10.23 3:20 PM Page 3