23
ENG
Your PDP has several settings which allow you to control picture
quality.
1Press the MENU button.
Result:The options available in the Picture group are
displayed.
2Press the √button.
3Press the ▲or ▼button to select Adjust. Press the √button.
Result:The Adjust menu is displayed.
4Press the ▲or ▼button to select the option (Contrast,
Brightness, Sharpness, Color, Tint-NTSC only) to be
adjusted. Press the œor √button.
Result:The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the œor √button.
5When you are satisfied with the settings, press the button to
store them.
6Press the MENU button.
Result:The options available in the Picture group are
displayed again.
7Press the ▲or ▼button to select Color Tone. Select the option
by pressing the œor √button. The color tones are displayed in
the following order.
Normal
-
Warm1
-
Warm2
-
Cool2
-
Cool1
➣If you make any changes to these settings, the picture
mode is automatically switched to the Custom.
Adjusting the Picture Settings
Mode œœDynamic √√
Adjust √√
Color Tone œœNormal √√
Size Wide
Digital NR œœOff √√
Picture
Move Enter Return
Adjust (Dynamic)
Contrast 100
Brightness 45
Sharpness 75
Color 55
Move Adjust Store
Mode œœDynamic √√
Adjust √√
Color Tone œœNormal √√
Size Wide
Digital NR œœOff √√
Picture
Move Enter Return
BN68-00457B-01_ENG 2003.10.23 3:21 PM Page 23