Konica Minolta 4556-9598-01A Error Messages on the Message Window, Error message Cause Solution

Error Messages on the Message Window

Error message		Cause	Solution
LINE PROBLEM		„ The telephone dialing	„ Check the telephone dialing
	(Flashing alter-	system or telephone	system or telephone wiring
nately)		wiring system is not	system and use the appropri-
		set correctly.	ate configuration menu to
CHECK LINE
			make the correct settings.
		„ The telephone cable
		is not attached cor-	„ Correctly connect the tele-
		rectly.	phone cable.
*COMM.ERROR*		„ Communication is not	Check the transmission results.
(####)		possible because of
		some problem in the
		machine.
		„ Communication is not
		possible because of a
		problem with the
		recipient/caller’s fax
		machine.
*REDIAL ALL FAILED*		All redial attempts failed	Check the condition of the recipi-
		because either the recip-	ent’s line, and then try sending
		ient’s line is busy or	the fax again.
		there was no answer.
*MEM.FULL/TX CAN-		While sending a fax, the	Retrieve all received faxes stored
CEL*		size of the data for the	in the memory.
		scanned image has	Send the fax by direct transmis-
		exceeded the capacity of
		the memory.	sion.
			To print an error report, press the
			Cancel/C key while an error
			message is displayed.
*MEM.FULL/RX CAN-		While receiving a fax,	Retrieve all received faxes stored
CEL*		the size of the data for	in the memory.
		the scanned image has	To print an error report, press the
		exceeded the capacity of
		the memory.	Cancel/C key while an error
			message is displayed.
HANG UP THE		The receiver of the con-	Replace the receiver of the con-
PHONE		nected telephone is	nected telephone on the hook.
		lifted.

Error Messages on the Message Window 69