4 Press the one-touch dial key that you want to program.

" If the one-touch dial key that is pressed is already registered with a recipient, the message “REGISTERED!” appears. Press the Menu Select key, and then press a one-touch dial key with no recipient reg- istered.

5 Enter the name of the one-touch dial to be programmed, and then press the Menu Select key.

"

"

Text up to 20 characters long can be entered for the name.

For details on entering/editing text and the characters that can be entered, refer to “Entering Text” on page 73.

" To cancel programming, press the Cancel/C key. (To cancel program- ming while the name is being entered, press the Menu Select key, and then press the Cancel/C key.)

6 Using the keypad, enter the fax number of the recipient, and then press the Menu Select key.

"

"

The fax number can contain a maximum of 50 characters.

For details on entering/editing numbers, refer to “Entering Text” on page 73.

" To cancel programming, press the Cancel/C key. (To cancel program- ming while the number is being entered, press the Menu Select key, and then press the Cancel/C key.)

7 Select the modem speed, and then press the Menu/Select key.

The entered information is programmed with the one-touch dial key, and the message “SELECT REGIST.KEY” appears.

8 To program another one-touch dial key, press the one-touch dial key, and then repeat the procedure starting from step 5.

OR

To finish the procedure and return to the Fax mode screen, continue pressing the Cancel/C key until the Fax mode screen is displayed.

One-Touch Dialing

51

Page 57
Image 57
Konica Minolta 4556-9598-01A manual One-Touch Dialing