Konica Minolta 4556-9598-01A manual Sending a Fax Using the Original Glass

Models: 4556-9598-01A

1 84
Download 84 pages 23.76 Kb
Page 38
Image 38

Sending a Fax Using the Original Glass

1

2

Press the Fax key to enter Fax mode. Remove all documents from the ADF.

" If you are using the original glass to scan, do not load any documents into the ADF.

3 Lift open the ADF cover.

4 Place the original document face down on the original glass and align the document on the scales above and to the left of the original glass.

5 Gently close the ADF cover.

" Closing it too quickly may cause the document to move on the original glass.

6 Press the Resolution key to specify the desired image quality.

" The document image quality can be adjusted by pressing the Resolu- tion key. For details, refer to “Improving Resolution” on page 34.

7 Specify the fax number of the recipient in one of the following ways:

Direct dialing

Using the one-touch dial keys (including group dialing)

Using the speed dial numbers

Using the phone book functions

Using the Redial/Pause key

" For details on specifying the recipient, refer to “Specifying a Recipient” on page 34. For details on using the Redial/Pause key, refer to “Using the Redial Function” on page 38.

" A transmission can also be sent to multiple recipients with the Broad- cast function. For details on sending a broadcast transmission, refer to “Sending a Fax to Multiple Recipients (Broadcast Transmission)” on page 38.

8 Press the Start key.

A screen appears, requesting confirmation of the scanning area.

9 To scan the displayed scanning area, press the Menu Select key. The document is scanned.

OR

To change the displayed scanning area, press the , key, select the desired scanning area in the next screen that appears, and then press the Menu Select key. The document is scanned.

32

Basic Fax Operation

Page 38
Image 38
Konica Minolta 4556-9598-01A manual Sending a Fax Using the Original Glass