The HBAnyware Utility User Manual Page 146

Error Message Situations

Table 21: Error Message Situations

Situation Resolution
The Access Sub-Group name already exists.
Please use a different name. This message
appears when you create an ASG.
You entered a duplicate ASG name in the Access Sub-
Group Name field. At each level of the security topology,
each ASG name must be unique.
Click OK on the message and enter a unique ASG name.
The Access Sub-Group parent’s ASG is offline.
You should delete the ASG when the parent
ASG is available. This ASG should only be
deleted if the parent ASG will not be available
again. Are you sure you want to delete this
ASG? This error message appears when you
delete an ASG.
The offline ASG entry serves as a placeholder for where
the real ASG would be in the tree. You can neither modify
nor delete it (although it is removed from the display if all
of the child ASGs are deleted). It is possible to delete the
child ASGs of the offline ASG. However, it is
recommended that you delete them only if the client for
the offline ASG will never be put online again. It is best to
delete child ASGs when the parent ASG is online.
Click Yes on the error message to delete the ASG or No
to close the message without deleting.
This system is not allowed client access to
remote servers. This program will exit.This
message appears when you start the Security
Configurator:
The system you are running the Security Configurator on
is already under the security umbrella as a server to one
or more clients. To make this server a client (so that it can
successfully run the Security Configurator), click OK to
close the message and exit the program, then do the
following:
1. Run the Security Configurator on the MSC or on any
client that has this server in its ASG.
2. Make this server a client to a group of servers.
There are no Backup Master Client Systems
assigned to this security configuration. At least
one should be assigned to avoid loss of the
security configuration should the Master Client
System become disabled.This message appears
when you start the Security Configurator.
Use the Backup Master tab to assign a Backup Master for
the MSC.
This utility is running on an unsecure system.
Continuing will allow you to set up a new
security configuration making this system the
Master Client System. This message appears the
first time you start the Security Configurator in an
unsecure environment.
Click OK on the message and complete the ACG setup.
The system on which the Security Configurator is running
will become the MSC.
Warning: This system is a backup master client
system. Therefore you will only be able to view
the security configuration. To make changes,
you will need to run this utility on the master
client system.This warning appears when you
start the Security Configurator on a Backup Master
system.
Because each Backup Master system receives all the
updates that the MSC makes to the security configuration,
the Backup Master systems must be online when the
Security Configurator is running on the MSC. Otherwise,
updates to the security configuration are not reflected to
the Backup Master. If the Backup Master becomes the
MSC, corruption of the security configuration may occur.
Click OK to close the message.