Emulex 3.4 user manual Lpfc

Table 5: Solaris emlxs (SFS) and Solaris LPFC Driver Parameter Cross-Reference (Continued)

Solaris	Solaris emlxs/HBAnyware	Related
emlxs/			LPFC Min/Max, Default and
	Min/Max, Defaults and	LPFC		Comments
HBAnyware			Description
	Description	Property
Property
topology	0 = loop, if it fails attempt pt-	topology	0x0 = loop, if it fails attempt	The topology
	to-pt		pt-to-pt	property controls
	2 = pt-to-pt only		0x2 = pt-to-pt only	protocol (not
	4 = loop only		0x4 = loop only	physical)
	6 = pt-to-pt, if it fails attempt		Default: 0	topology
	loop		Description: Controls the FC	attempted by the
	Default: 0		topology expected by LPFC	driver.
	Description: Link topology		at boot time. FC offers pt-to-
	for initializing the FC		pt, fabric and arbitrated loop
	connection. Set pt-to-pt if		topologies. To make the
	you want to run as an		HBA operate as an N_Port,
	N_Port. Set loop if you want		select pt-to-pt mode (used
	to run as an NL_Port.		for N_Port to F_Port and
			N_Port to N_Port
			connections). To make the
			HBA operate as an NL_Port,
			select loop mode (used for
			private loop and public loop
			topologies). The driver will
			reject an attempt to set the
			topology to a value not in the
			above list. The auto-
			topology settings 0 and 6 will
			not work unless the HBA is
			using firmware version 3.20
			or higher.
ub-bufs	Min:40	N/A	N/A
	Max:16320
	Default:1000
	Description: Sets the
	number of unsolicited
	buffers to be allocated.

The HBAnyware Utility User Manual Page 84