Emulex 3.4 user manual Lpfc

Table 5: Solaris emlxs (SFS) and Solaris LPFC Driver Parameter Cross-Reference (Continued)

Solaris	Solaris emlxs/HBAnyware	Related
emlxs/			LPFC Min/Max, Default and
	Min/Max, Defaults and	LPFC		Comments
HBAnyware			Description
	Description	Property
Property
auth-cfgs	This is the DH-CHAP related	auth-	This is the DH-CHAP related	For detail on this
	driver property for FC-SP	cfgparms	driver property for FC-SP	emlxs parameter,
	support. It is only valid when		support. It is only valid when	see Table 4.
	driver property enable-auth		driver property enable-auth
	is set to 1. This driver		is set to 1. This driver	For detail on this
	property is ignored when		property is ignored when	LPFC parameter,
	enable-auth is set to 0.		enable-auth is set to 0.	see Table 3.
auth-keys	This is the DH-CHAP	auth-keys	This is the DH-CHAP	For detail on this
	authentication key driver		authentication key driver	emlxs parameter,
	property for FC-SP support.		property for FC-SP support.	see Table 4.
	It is only valid when driver		It is only valid when driver
	property enable-auth is set		property enable-auth is set	For detail on this
	to 1. This driver property is		to 1.	LPFC parameter,
	ignored when enable-auth is			see Table 3.
	set to 0.
console-	Min: 0x00000000	log-verbose	Min:0x0	N/A
notices	Max:0xFFFFFFFF		Max:0xffff
	Default: 0x0000000		Default:0x0
	Verbose mask for notice		(bit mask) When set to
	messages to the console.		nonzero this variable causes
			LPFC to generate additional
			messages concerning the
			state of the driver and the
			I/O operations it carries out.
			These messages may go to
			the system console.
console-	Min: 0x00000000	log-verbose	Min:0x0	N/A
warnings	Max:0xFFFFFFFF		Max:0xffff
	Default: 0x0000000		Default:0x0
	Verbose mask for warning		(bit mask) When set to
	messages to the console.		nonzero this variable causes
			LPFC to generate additional
			messages concerning the
			state of the driver and the
			I/O operations it carries out.
			These messages may go to
			the system console.
console-	Min: 0x00000000	log-verbose	Min:0x0	N/A
errors	Max:0xFFFFFFFF		Max:0xffff
	Default: 0x0000000		Default:0x0
	Verbose mask for error		(bit mask) When set to
	messages to the console.		nonzero this variable causes
			LPFC to generate additional
			messages concerning the
			state of the driver and the
			I/O operations it carries out.
			These messages may go to
			the system console.

The HBAnyware Utility User Manual Page 80