Emulex 3.4 user manual LWWNRWWNLtypeLkeyRtypeRkey

Table 4: emlxs.conf Parameters (Continued)

Property	Default	Min	Max	Activation	Comments
Name
auth-cfgs	However, since the parameter represents a table of entries the table can represent all entries
(continued)	across all HBA instances. This allows all HBA instances to share a common table of entries.
auth-keys	Description and Values: This is the DH-CHAP authentication key driver property for FC-SP
	support. It is only valid when driver property enable-auth is set to 1. This driver property
	should be ignored when enable-auth is set to 0. This property represents a table of entries.
	The format of the table is:

"LWWN:RWWN:Ltype:Lkey:Rtype:Rkey",

"LWWN:RWWN:Ltype:Lkey:Rtype:Rkey",

"LWWN:RWWN:Ltype:Lkey:Rtype:Rkey",

The table can hold as many entries as needed.

LWWN: The WWPN of the local entity, i.e. HBA port. You should use the form of NNNNNNNNNNNNNNNN, where NNNNNNNNNNNNNNNN is a 16 digit representation of the Host port WorldWide Port Name. Or you could use 0000000000000000 to refer to local port WWPN.

RWWN: The WWPN of the remote entity, i.e. Fabric controller or any remote Nport. You should use the form of NNNNNNNNNNNNNNNN, where NNNNNNNNNNNNNNNN is a 16 digit representation of the Fabric Controller or Nport FFFFFFFFFFFFFFFF as generic remote fabric port WWPN.

Ltype: The local key type. The type field can be 1 (ASCII text formatted key) or 2 (binary hex formatted key).

Lkey: The local key to be associated with the local entity. For example a key of ASCII type

could look like: abcdefgh. A key of binary type could look like: 12ef58c98274d46.

Rtype: The remote key type. The type field can be 1 (ASCII text formatted key) or 2 (binary hex formatted key).

Rkey: The remote key to be associated with the remote entity. For example a key of ASCII

type could look like: abcdefgh. A key of binary type could look like: 12ef58c98274d46.

You can use emlxsX-auth-keys to specify the per HBA instance DH-CHAP authentication keys. Any valid setup in this way will overwrite the auth-keys setup. However, since the parameter represents a table of entries the table can represent all entries across all HBA instances. This allows all HBA instances to share a common table of entries.

console-	0x00000000	0x00000000	0xFFFFFFFF	Requires	Verbose mask for notice
notices				reboot.	messages to the console.
console-	0x00000000	0x00000000	0xFFFFFFFF	Requires	Verbose mask for warning
warnings				reboot.	messages to the console.
console-errors	0x00000000	0x00000000	0xFFFFFFFF	Requires	Verbose mask for error
				reboot.	messages to the console.

The HBAnyware Utility User Manual Page 76