Emulex 3.4 user manual Adding a Server to an ASG, Deleting an ASG, Editing an ASG

Adding a Server to an ASG

To add a server to an ASG:

1.Click the Access Sub-Grouptab (see Figure 46 on page 106).

2.The name of the ASG appears in the Access Sub-Groups tree. From the Available Servers list, select the servers to add to the ASG.

Note: TCP/IP accessed servers will appear in the Available Servers list even though the ASG client system may not have discovered them yet. These servers can still be added to the Access Sub-Group Servers list.

3.Click the left arrow to move the servers to the Access Sub-Group Servers list.

4.Click Apply to update servers, adding them to the ASG. The new client can remotely manage the HBAs on those servers using the HBAnyware utility.

Deleting an ASG

Only a leaf node ASG may be deleted (i.e. not ASGs underneath it in the tree). If an ASG has at least one child ASG, you must delete those child ASGs first.

To delete an ASG:

1.From the Access Sub-Group tree, select the leaf node ASG you wish to delete.

2.Click Delete. A dialog box appears warning you that if you continue the access sub-group will be deleted.

3.Click Yes. This operation is immediate. There is no need to click Apply.

Restoring an ASG to Its Last Saved Configuration

You can restore an Access Sub-Group (ASG) to its last saved configuration if there are unsaved changes to it.

To restore an ASG to its last saved configuration:

1.Click the Access Sub-Grouptab (see Figure 46 on page 106).

2.Select the ASG whose configuration you want to restore.

3.Click Restore.

4.Click Apply to save your changes.

Editing an ASG

You can change the name, client system or reserved indices of an Access Sub-Group (ASG). To edit an ASG:

1.Click the Access Sub-Grouptab (see Figure 46 on page 106).

2.Select the ASG you want to edit.

The HBAnyware Utility User Manual Page 108