
Using the HBAnyware Components
Note: To properly view the HBAnyware utility, ensure your system meets the following display requirements:
For Windows systems the display resolution must be set to 800 by 600 or better. For UNIX systems the display resolution must be set to 1024 by 768 or better.
The display must run in
Starting the HBAnyware Utility
To start the HBAnyware utility: In Windows:
On the Windows desktop, select Start>All Programs>Emulex>HBAnyware. If you have a Vista system,
In Solaris LPFC, Solaris emlxs (SFS) and Linux:
1.Log on as ‘root’.
2.Run the script to start the HBAnyware utility.
•Solaris LPFC and Solaris emlxs (SFS): cd /opt/hbanyware/hbanyware
•Linux:
cd /usr/sbin/hbanyware/hbanyware
Starting HBAnyware with Web Launch
After the HBAnyware Web Launch software is installed and the Web Launch server is initialized, you can launch the HBAnyware utility directly with your Web browser.
Note: Only the HBAnyware Web Launch graphic GUI is being exported to the requesting client. All HBA discovery and remote management operations are performed by resources running on the remote host that served up the GUI component. Therefore, the SAN view displayed by the GUI is not from the client running the GUI, but rather from the host from which this GUI was retrieved.
To launch the HBAnyware utility with your Web browser:
1.Open your Web browser.
2.Enter the URL of an HBAnyware.jnlp file. Make sure that the URL specifies a remote server which has the HBAnyware Web Launch software installed and running. For example:
http://138.239.20.30/hbanyware.jnlp
Starting the HBAnyware Security Configurator
Before starting the HBAnyware Security Configurator:
•Ensure that all of the systems that are part of, or will be part of, the security configuration are online on the network so that they receive updates or changes made to the security configuration.
The HBAnyware Utility User Manual | Page 11 |