Emulex 3.4 user manual Emlxs.conf Parameters

Table 4: emlxs.conf Parameters (Continued)

Property	Default	Min		Max	Activation	Comments
Name
num-nodes	0	0		4096	Requires	Number of FC nodes
					HBA reset.	(NPorts) the driver will
						support.
pci-max-read	2048	512		4096	Requires	Sets the PCI-X max
					HBA reset	memory read byte count
						[512, 1024, 2048 or 4096]
pm-support	0 .	0		1	Requires	Enable/Disable power
					reboot.	management support in the
						driver.
						0 = Disables power
						management support in the
						driver.
						1 = Enables power
						management support in the
						driver.
ub-bufs	1000	40		16320	Requires	Sets the number of
					reboot.	unsolicited buffers to be
						allocated.
topology	0	0	=loop, then P2P		Requires	Set to point-to-point mode if
		2	=P2P only		link reset.	you want to run as an
		4	=loop only			N_Port. Set to loop mode if
		6	=P2P, then loop			you want to run as an
						NL_Port.

The HBAnyware Utility User Manual Page 78