
Table 17: Emulex Driver for Linux and HBAnyware Situations (Continued)
| Situation | Resolution | |
| 
 | 
 | |
| 
 | 
 | |
| Cannot See Other HBAs or Hosts. | All the HBAs in the SAN will be visible if: | |
| Although HBAnyware is installed, only local | • | The other servers have a connection to your zone of the | 
| host bus adapters (HBAs) are visible. The | 
 | SAN. Check fabric zoning. | 
| other HBAs and hosts in the SAN cannot be | • | The elxhbamgr processes are running on remote hosts (enter | 
| seen. | 
 | ps  | 
| 
 | • All other HBAs are running HBAnyware and the appropriate | |
| 
 | 
 | driver. | 
| 
 | • The other HBAs are Emulex HBAs. | |
| 
 | Note: HBAnyware services must be running on all remote | |
| 
 | 
 | hosts that are to be discovered and managed. If the | 
| 
 | 
 | HBAnyware Security Configurator is running, only the | 
| 
 | 
 | master or Access group client can see the servers. | 
| 
 | 
 | |
| Cannot See New LUNs. Although new | Try the following: | |
| LUNs were created on the storage array, | 1. Refresh the screen. | |
| they do not appear in HBAnyware. | 2. | Exit HBAnyware and restart HBAnyware. If new LUNs are | 
| 
 | ||
| 
 | 
 | visible, you are finished. | 
| 
 | If that doesn't work, try the following: | |
| 
 | 1. | Exit HBAnyware. | 
| 
 | 2. | Navigate to /usr/sbin/hbanyware. | 
| 
 | 3. | Run ./stop_hbanyware to stop both the elxhbamgr and | 
| 
 | 
 | elxdiscovery processes. | 
| 
 | 4. | Run ./start_elxhbamgr and ./start_elxdiscovery to restart | 
| 
 | 
 | both processes. | 
| 
 | 5. | Start HBAnyware. | 
| 
 | 
 | |
| Unwanted Remote Servers Appear in | To prevent unwanted servers from appearing in HBAnyware, do | |
| HBAnyware | the following: | |
| 
 | 1. | Navigate to /usr/sbin/hbanyware. | 
| 
 | 2. | Run ./stop_hbanyware to stop both the elxhbamgr and | 
| 
 | 
 | elxdiscovery processes. | 
| 
 | 3. | Run ./start_elxhbamgr and ./start_elxdiscovery to restart | 
| 
 | 
 | both processes. Disabling this service or process prevents | 
| 
 | 
 | the local servers from being seen remotely. | 
| 
 | 
 | |
| Cannot access formerly accessible | This is actually a symptom of two different problems. | |
| servers via the Security Configurator or | • | New Keys Were Generated While Servers Were Offline | 
| the HBAnyware Utility. | • | Security Removed While Servers Were Offline | 
| 
 | See Table 22 on page 147 for details regarding these | |
| 
 | problems. | |
| 
 | 
 | 
 | 
| The HBAnyware Utility User Manual | Page 142 | 
