Removing Hosts
Removing hosts that can no longer be discovered improves the operation of the discovery server. For example, you may want to remove a host when it is removed from the network or detect hosts that are no longer being discovered.
To remove hosts:
1.From the Discovery menu, select TCP/IP>Remove Host(s). The Remove TCP/IP Hosts dialog box shows a list of discovered hosts. Any host not currently discovered appears in red. Click Show Undiscovered Hosts Only to only display currently undiscovered hosts.
2.From the Remove TCP/IP Hosts dialog box, select the hosts you wish to remove. You can select all the displayed hosts by clicking Select All.
3.Click OK (or Remove) to remove the selected hosts.
Configuring Discovery Settings
Use the HBAnyware Discovery Settings dialog box to configure several discovery server parameters. You can define when to start the discovery server, when to refresh FC and TCP/IP accessed discoveries and when to remove previously discovered HBAs that are no longer being discovered.
Figure 12: HBA Discovery Properties dialog box
To configure discovery settings:
1.From the Menu bar, select Discovery/Modify Settings. The HBA Discovery Properties dialog box appears.
2.Define the discovery properties you wish and click OK. Click Defaults to return the discovery properties to their default settings.
The HBAnyware Utility User Manual | Page 23 |
