RemovePersistentBinding
Supported by: Windows, Solaris LPFC and Solaris emlxs (SFS).
Syntax: hbacmd RemovePersistentBinding <WWPN> <BindType> <ID> <SCSIBus> <SCSITarget>
Description: Removes persistent binding between an FC target and a SCSI Bus and target. The binding to be removed can be to a target WWPN, target WWNN, or target D_ID.
Parameters:
WWPN - World Wide Port Name of the HBA whose persistent bindings you wish to remove.
BindType - P = Remove binding by WWPN, N = Remove binding by WWNN, D = Remove binding by D_ID
ID - Target WWPN if BindType = P, Target WWNN if BindType = N, Target D_ID if BindType = D SCSIBus - Bus number of SCSI device.
SCSITarget - Target number of SCSI device.
BindingCapabilities
Supported by: Windows, Solaris LPFC and Solaris emlxs (SFS).
Syntax: hbacmd BindingCapabilities <WWPN>
Description: Shows the binding capabilities present for the HBA. If a binding is configured, it means the binding is maintained across reboots.
Parameters:
WWPN - World Wide Port Name of the HBA whose binding capabilities you wish to view.
BindingSupport
Supported by: Windows, Solaris LPFC and Solaris emlxs (SFS).
Syntax: hbacmd BindingSupport <WWPN> <Source>
Description: Shows the binding support available for the HBA. Parameters:
WWPN - World Wide Port Name of the HBA whose binding support you wish to view. Source - C = Configuration support, L = Live support
SetBindingSupport
Supported by: Windows, Solaris LPFC and Solaris emlxs (SFS).
Syntax: hbacmd SetBindingSupport <WWPN> <BindFlag>
Description: Enables and sets the binding support(s) for the HBA. Parameters:
WWPN - World Wide Port Name of the HBA whose binding support you wish to set and enable.
BindFlag - *D = Binding by D_ID, P = Binding by WWPN, * N = Binding by WWNN, *A = Binding by Automap, DA = Binding by D_ID and Automap, PA = Binding by WWPN and Automap, NA = Binding by WWNN and Automap
* Not available for the Storport Miniport driver.
The HBAnyware Utility User Manual | Page 129 |
