Emulex 3.4 user manual Lpfc

Table 5: Solaris emlxs (SFS) and Solaris LPFC Driver Parameter Cross-Reference (Continued)

Solaris	Solaris emlxs/HBAnyware	Related
emlxs/			LPFC Min/Max, Default and
	Min/Max, Defaults and	LPFC		Comments
HBAnyware			Description
	Description	Property
Property
log-notices	Min: 0x00000000	log-verbose	Min:0x0	N/A
	Max:0xFFFFFFFF		Max:0xffff
	Default: 0x0000000		Default:0x0
	Verbose mask for notice		(bit mask) When set to
	messages to the messages		nonzero this variable causes
	file.		LPFC to generate additional
			messages concerning the
			state of the driver and the
			I/O operations it carries out.
			These messages may go to
			the system log file,
			/var/adm/messages.
log-warnings	Min: 0x00000000	log-verbose	Min:0x0	N/A
	Max:0xFFFFFFFF		Max:0xffff
	Default: 0x0000000		Default:0x0
	Verbose mask for warning		(bit mask) When set to
	messages to the messages		nonzero this variable causes
	file.		LPFC to generate additional
			messages concerning the
			state of the driver and the
			I/O operations it carries out.
			These messages may go to
			the system log file,
			/var/adm/messages.
log-errors	Min: 0x00000000	log-verbose	Min:0x0	N/A
	Max:0xFFFFFFFF		Max:0xffff
	Default: 0x0000000		Default:0x0
	Verbose mask for error		(bit mask) When set to
	messages to the messages		nonzero this variable causes
	file.		LPFC to generate additional
			messages concerning the
			state of the driver and the
			I/O operations it carries out.
			These messages may go to
			the system log file,
			/var/adm/messages.
network-on	Min:0 (Disables)	network-on	Min:0 (Disables)	The LPFC
	Max:1 (Enables)		Max:1 (Enables)	parameter
	Default:1		Default: 0	enables or
	Description: Enables or		Description: Controls	disables FCIP on
	disables IP networking		whether LPFC provides IP	the Emulex HBA
	support in the driver.		networking functionality over
			FC. This variable is Boolean:
			when zero, IP networking is
			disabled: when non-zero, IP
			networking is enabled.

The HBAnyware Utility User Manual Page 82