PersistentBinding
Supported by: Windows, Solaris LPFC and Solaris emlxs (SFS).
Syntax: hbacmd PersistentBinding <WWPN> <Source>
Description: Specifies which set of persistent binding information is requested: the configured or live state of any present binding.
Parameters:
WWPN - World Wide Port Name of the HBA whose persistent binding information you wish to specify. Source - C = Configuration, L = Live
SetPersistentBinding
Supported by: Windows, Solaris LPFC and Solaris emlxs (SFS).
Syntax: hbacmd SetPersistentBinding <WWPN> <Scope> <BindType> <TargetId> <SCSIBus> <SCSITarget>
Description: Sets a persistent binding between an FC target and a SCSI Bus and target. The binding can be to a target WWPN, target WWNN, or target D_ID.
Parameters:
WWPN - World Wide Port Name of the HBA whose persistent bindings you wish to set.
Scope - P = Binding is permanent (survives across reboot), I = Binding is immediate, B = Binding is both permanent and immediate
BindType - P = Enable binding by WWPN, N = Enable binding by WWNN, D = Enable binding by D_ID TargetId - Target WWPN if BindType = P, Target WWNN if BindType = N, Target D_ID if BindType = D SCSIBus - Bus number of SCSI device.
SCSITarget - Target number of SCSI device.
RemoveAllPersistentBinding
Supported by: Windows, Solaris LPFC and Solaris emlxs (SFS).
Syntax: hbacmd RemoveAllPersistentBinding <WWPN>
Description: Removes all persisting bindings for the HBA. Parameters:
WWPN - World Wide Port Name of the HBA whose persistent bindings you wish to remove.
The HBAnyware Utility User Manual | Page 128 |
