Emulex 3.4 user manual Access Sub-Groups, Restoring the ACG to Its Last Saved Configuration

Restoring the ACG to Its Last Saved Configuration

You can restore the ACG to its last saved configuration, if there are unsaved changes to the ACG, only from the Master Security Client (MSC).

To restore the ACG to its last saved configuration:

From the Access Control Group tab on the MSC, click Restore (Figure 43).

Accessing a Switch

You can enable switch access only on a Master Security Client (MSC). Switch access grants the client access rights to a switch to remotely access HBAs on servers in the Access Control Group (ACG).

To enable switch access:

From the Access Control Group tab, check Enable Switch Access. (Figure 43).

Access Sub-Groups

Introduction

Use the Access Sub-Group tab to create multiple Access Sub-Groups (ASGs) and multiple levels (tiers) in the security topology hierarchy. The hierarchy can be as many levels deep as desired. However, we recommend the hierarchy extend no more than three levels deep, as it becomes increasingly difficult to keep track of the topology the deeper it goes. The hierarchy shows in the Access Sub-Groups tab as a tree. You can create, modify and delete ASGs at each level in this tree.

Figure 45: Access Sub-Groups tab with Sub-Groups Created

The HBAnyware Utility User Manual Page 105