Emulex 3.4 user manual Diagnostics, Performing Diagnostic Tests

Diagnostics

Performing Diagnostic Tests

Note: All diagnostic tests and diagnostic dumps can only be performed on the local system or on remote systems connected with TCP/IP access. Diagnostic tests and diagnostic dumps cannot be performed on remote systems connected with FC access.

Note: Diagnostics are not available on VMware ESX Server.

Use the Diagnostics tab to do the following:

•Run these tests on Emulex HBA's installed in the system:

•PCI Loopback (see page 119)

•Internal Loopback (see page 119)

•External Loopback (see page 119)

•Power-On Self Test (POST) (see page 116)

•Echo (End-to-End) (see page 121)

•Quick Test (see page 116)

•Perform a diagnostic dump (see page 117)

•View PCI registers and wakeup parameter (see page 118)

•Control HBA beaconing (see page 116)

Figure 53: Diagnostics tab

The HBAnyware Utility User Manual Page 115