Emulex 3.4 user manual SetAuthConfig, SetPassword, DeleteAuthConfig

SetAuthConfig

Supported by: Windows, Solaris LPFC, Solaris emlxs (SFS) and Linux.

Syntax: hbacmd SetAuthConfig <WWPN1> <WWPN2> <PasswordType> <Password> <Parameter> <Value>

Description: Sets the authentication configuration for the HBA. Parameters:

WWPN1 - World Wide Port Name of the HBA whose authentication configuration you wish to set. WWPN2 - Must be ff:ff:ff:ff:ff:ff:ff:ff

PasswordType - 1 = ASCII, 2 = Hex (binary), 3 = Password not yet defined Password - Current password value

Parameter - Parameters include Mode, Timeout, Bi-directional, Hash-priority, DH-priority, Re- authentication, Re-authentication-interval

Value - Parameter-specific value: Mode = <disabled, enabled, passive>, Timeout = time in seconds, Bi- directional = <disabled, enabled>, Hash-priority = <md5, sha1> (md5 = first md5, then sha1; sha1 = first sha1, then md5), DH-priority = <1,2,3,4,5>, any combination up to 5 digits, Re-authentication = <disabled, enabled>, Re-authentication-interval = < 0, 10 - 3600>

SetPassword

Supported by: Windows, Solaris LPFC, Solaris emlxs (SFS) and Linux.

Syntax: hbacmd SetPassword <WWPN1> <WWPN2> <Flag> <Cpt> <Cpw> <Npt> <Npw>

Description: Sets the password for the HBA. Parameters:

WWPN1 - World Wide Port Name of the HBA for which you wish to set a password. WWPN2 - Must be ff:ff:ff:ff:ff:ff:ff:ff

Flag - 1 = Local (password used by HBA when HBA authenticates to the switch), 2 = Remote (password used by HBA when switch authenticates to the HBA)

Cpt - Current password type is 1 = ASCII or 2 = Hex (binary), 3 = Password not yet defined Cpw - Current password value.

Npt - New password type is 1 = ASCII or 2 = Hex (binary) Npw - New password value.

DeleteAuthConfig

Supported by: Windows, Solaris LPFC, Solaris emlxs (SFS) and Linux.

Syntax: hbacmd DeleteAuthConfig <WWPN1> <WWPN2> <PasswordType> <Password>

Description: Deletes the authentication configuration on the HBA. Parameters:

WWPN1 - World Wide Port Name of the HBA whose authentication configuration you wish to delete WWPN2 - Must be ff:ff:ff:ff:ff:ff:ff:ff

PasswordType - 1 = ASCII, 2 = Hex (binary), 3 = Password not yet defined Password - Current password value.

The HBAnyware Utility User Manual Page 132