Emulex 3.4 user manual LPFC.conf Parameters

Table 3: LPFC.conf Parameters (Continued)

Property Name	Scope	Default	Min	Max	Dynamic	Comments
cr-count	Controller	1	1	255	No	This value specifies a count of
	Specific					I/O completions after which an
						interrupt response is
						generated. This feature
						is disabled if cr-delay is set to
						0.
cr-delay	Controller	0	0	63	No	This value specifies a count of
	Specific					milliseconds after which an
						interrupt response generated
						if cr-count has not been
						satisfied. This value is set to 0
						to disable the Coalesce
						Response feature as default.
delay-rsp-err	Controller	0	0=Off	1=On	Yes	(Boolean) The driver will delay
	Specific					FCP RSP errors being
						returned to the upper SCSI
						layer based on the no-device-
						delay configuration driver
						property.
discovery-threads	Controller	1	1	32	No	Number of ELS commands
	Specific					during discovery. This value
						specifies the number of
						threads permissible during
						device discovery. A value of 1
						serializes the discovery
						process.

The HBAnyware Utility User Manual Page 63