The HBAnyware Utility User Manual Page 93
lpfc_fcp_bind_DID inactive N/A N/A No Bind specific SCSI IDs to targets
based on FC Port ID.
lpfc_fcp_bind_method 2 1 4 No Specifies the bind method
(WWWN/WWPN/DID/ALPA map)
to be used.
lpfc_fcp_bind_WWNN inactive N/A N/A No Bind specific SCSI IDs to targets
based on FC WWNN.
lpfc_fcp_bind_WWPN inactive N/A N/A No Bind specific SCSI IDs to targets
based on FC WWPN.
lpfc_fcp_class 3 2 3 Yes FC class for FCP data
transmission.
lpfc_fdmi_on 0 0 2 No False (0) if disabled. (1) or (2) if
enabled depending on type of
support needed.
lpfc_initiator_login: 0 0 1 Yes If this parameter is set to 1 then the
driver will allow logins to and from
other FCP initiators.
lpfc_inq_pqb_filter 1 0=Off 1=On No If true, the driver changes the
peripheral quantifier bit from 1 to 3
for inquiry responses.
lpfc_iocb_wdog_tmo 40 0 55 No Timeout value for pending FC I/O
in the driver.
lpfc_linkdown_tmo 30 0 255 Yes (seconds) How long the driver
waits before deciding that the FC
link is down.
lpfc_link_speed 0 0=auto select
1=1G
2=2G
4=4G
8=8G
No Sets link speed.
lpfc_log_verbose 0x0 0x0 0xffff Yes (bit mask) Extra activity logging.
lpfc_lun_queue_depth 30 1 128 Yes Default max commands sent to a
single logical unit (disk).
lpfc_lun_skip 0 0=Off 1=On No Allows SCSI layers to detect all
LUNs if there are LUN holes on a
device.
lpfc_max_lun 256 1 256 Yes Specifies the maximum number of
LUNs per target. A value of 20
means LUNs from 0 to 19 are valid.
lpfc_max_target 256 1 256 No This configuration parameter limits
how many targets the driver will
support.
Table 11: Driver for VMware ESX Configuration Parameters (Continued)
Variable Default Min Max Dynamic Comments