Loewe A 42 HD+ 100, A 37 Full-HD+ 100, A 37 HD+ 100, A 32 HD+ 100 manual

Initial installation

Digital Link	If you have logged in and connected a recorder in the
Plus	connection wizard, the Digital Link Plus transmission
	starts when the sound component wizard closes. If a
	Digital Link Plus compatible recorder is connected, the
	station list of the analogue stations is transmitted to the
	external recorder.
	You can also call Digital Link Plus manually under TV menu
	→ Connections → Digital Link Plus.

Explanations of the DVB-T antenna:

Room	With good reception conditions a room antenna can be
antenna	used for DVB-T (socket ANT2).
Active	Under less favourable reception conditions, an active
antenna	antenna is recommended which must be set accordingly
	in the first time commissioning or in the TV menu → Con-
	nections → Antenna DVB → Antenna DVB-T (see DVB-T
	antenna on page 13).
Unidirectional	If the location is outside of the normal transmission range
antenna	then a directional antenna can be used to improve recep-
	tion quality.

- 14

33156_024_Xelos_A32_42_GB_9_00_B14 14

Positioning/aligning the DVB-T antenna

If you receive one or more DVB-T stations with picture or sound interfer- ence, you should change the position and alignment of the antenna. Ask your dealer to tell you which channels are used to broadcast the DVB-T stations in your region.

➠In normal TV mode, without other displays. A DVB-T station is received and selected.

Call TV menu.

Select Settings,

go to the menu line below.

Select Stations,

go to the menu line below.

Select Manual adjustment, OK call manual adjustment.

Signal source

Select the area in which you want the broadcaster to search here. You can

use the button to automatically select station by station.

Manual adjustment
SIgnal source	DVB-T	DVB-C	DVB-S	A
Channel	E05
Frequency	177.50 MHz
Bandwidth	7 MHz
Name	12 Test
C/N	81
Level	80
BER	0 E-7

	END
Overwrite station
Search	INFO

The signal source is already on DVB-T due to the station preselection.

Position and align the antenna in such a manner that maximum values for C/N and Level are obtained.

Blue button: Start search.

Search for DVB-T stations one after another and compare values for C/N and Level.

Then position/align the antenna to the weakest station so that maximum values for C/N and Level are obtained.

Thereafter perform an automatic search for all DVB-T stations, see page 24.

Explanation of the setting possibilities:

Bandwidth Depending on the selected channel and country the associated bandwidth of 7 or 8 MHz will be set auto- matically.

03.07.2008 15:36:50