DVB
Conditional Access module (CA module)
In order to be able to receive digital stations, a Conditional Access module (CA module) and a Smart Card must be inserted in the CI slot of your TV set (see pages 5 and 6).
The CA module and the Smart Card are not part of the TV set's scope of delivery. They are usually available from your dealer. Loewe provides no guarantee for the functioning of the CA module.
Inserting the smart card into the CA module
Push the Smart Card into the CA module as far as it goes so that the side with the gold coloured contact chip is facing the side of the CA module marked with the provider's logo. Note the direction of the arrow printed on the Smart Card.
Inserting the CA module in the CI slot
➠Switch off the TV set's power switch. Remove the cover from the rear of the set.
Ejector button
Cover
Insert the CA module carefully into the CI slot with the contact side first.
If you are standing in front of the TV set (display) then the logo on the CA module must be pointing to the rear. Do not use force. Make sure the module is not twisted in the process.
The eject button protrudes slightly when the CA module is inserted correctly.
33156_024_Xelos_A32_42_GB_9_00_B35 35
Searching for encrypted stations
➠The search wizard must only be started when the setting possibility no has been selected for the search for coded stations in
Call TV menu.
Select Settings,
go to the menu line below.
Select Stations,
go to the menu line below.
Select Search wizard,
go to the menu line below.
Select Change search settings,
OK wizard guides you through the search settings.
Description of the search settings, see page 24.
Calling CA module information
➠This menu is only available with digital stations.
Call TV menu.
Select Settings,
go to the menu line below.
Select Miscellaneous,
go to the menu line below.
Select CA module: xxx
(xxx corresponds to the CA module provider), OK call information.
The content of this menu depends on the provider of the CA module.
Removing the CA module
➠Switch off the TV set's power switch.
Remove the cover from the rear of the set.
Press in the ejection button on the appropriate module drawer, the module is released.
Remove the module from the set. Replace the cover.
35 -
03.07.2008 15:38:41