13
Troubleshooting
Situation | Solution | |
|
| |
| • Connect the power cord properly. | |
| • Press the POWER button on the con- | |
| trol panel or remote control. | |
| • Press the SOURCE button to cycle | |
No picture and sound. | through connected video sources. | |
• Press the CH UP or CH DOWN but- | ||
| ton to switch to other TV stations. | |
| • Check the TV/CATV OSD settings. | |
| See “TV/CATV” on page 45. | |
| • Make sure all cables are connected | |
| properly. | |
|
| |
| • Check the antenna and cable connec- | |
No picture, or poor picture, | tions. | |
sound is OK. | • Adjust the brightness in the OSD | |
| menus. See “Brightness” on page 32. | |
|
| |
Picture is not in color. | • Adjust the saturation in the OSD | |
menus. See “Saturation” on page 36. | ||
| ||
|
| |
| • Press the VOL UP button on the con- | |
Picture is OK, no sound. | trol panel or remote control. | |
• Make sure the MTS option is set to | ||
| ||
| MAIN or MONO. | |
|
| |
One of the speakers has no | • Adjust the balance in the OSD | |
sound. | menus. See “Balance” on page 42. | |
|
| |
Can’t receive some TV chan- | • Try the Auto Program function in the | |
OSD “TV Setting” menu. See “Auto | ||
nels using cable TV. | ||
Program” on page 47. | ||
| ||
|
| |
Want to reset TV settings. | • Use the Preset function in the OSD | |
Picture and Audio menu. | ||
|
52 
