13
Troubleshooting
Situation | Solution | |
|
| |
| • Connect the power cord properly. | |
| • Press the POWER button on the control panel | |
| or remote control. | |
| • Press the SOURCE button to cycle through | |
No picture and sound. | connected video sources. | |
• Press the CHANNEL UP or CHANNEL DOWN | ||
| ||
| buttons to switch to other TV stations. | |
| • Check the TV/CATV OSD settings. See | |
| “TV/CATV” on page 66. | |
| • Make sure all cables are connected properly. | |
|
| |
No picture, or poor picture, sound is | • Check the antenna and cable connections. | |
• Adjust the brightness in the OSD menus. See | ||
OK. | ||
“Brightness” on page 50. | ||
| ||
|
| |
Picture is not in color. | • Adjust the saturation in the OSD menus. See | |
“Sharpness” on page 54. | ||
| ||
|
| |
| • Press the VOLUME UP button on the control | |
Picture is OK, no sound. | panel or remote control. | |
| • Make sure the MTS option is set to MAIN. | |
|
| |
One of the speakers has no sound. | • Adjust the balance in the OSD menus. See | |
“Balance” on page 62. | ||
| ||
|
| |
Can’t receive some TV channels | • Try the Auto Program function in the TV Set- | |
using cable TV. | tings menu. See “Auto Scan” on page 68. | |
|
| |
Want to reset TV settings. | • Use the Preset function in the OSD Picture and | |
Audio menu. | ||
| ||
|
| |
| • If OSD items are colored light blue, it means | |
Cannot operate menus. | that these settings are not available. For exam- | |
ple, TV settings are available in TV mode | ||
| ||
| (when source is selected to be TV). |
No image but sound available.
•Make sure the video signal cable is connected properly.
82 
