HANNspree ST59-23A1 user manual Using PIP and POP

Using PIP and POP

The TV features Picture-in-Picture (PIP) and Picture-on-Picture, enabling you to view two sources at the same time. Follow these instructions.

1Turn on the TV and select a source signal.

MAIN - TV CH 007

2Press the PIP button on the remote control.

A picture-in-picture window appears on the display, using the last selected source signal for the PIP.

MAIN - TV CH 007 PIP - CATV CH056

Note:

Refer to “PIP Operation Mode” on page 85 for information on which sources are compatible with each other in PIP and POP mode.

3Press the SWAP button on the remote control to switch the focus from the PIP to the main source. The PIP identification line disappears and the PIP window border disappears.

MAIN - TV CH 007

38