Channel Add/Erase
TV MENU |
|
| |
TV/CATV |
| CATV | |
| |||
CH | ADD/ERASE |
|
|
AUTO PROGRAM | |||
SEL | ENTER |
| MENU |
| TV | 43 | |
| CH UP/DOWN | ||
| ERASE ADD | ||
MENU
1Press the CH DOWN button to select
CH ADD/ERASE.
2Press the VOL UP button. The OSD menu display switches to the following screen.
3Press the CH UP/CH DOWN button on the front panel to select a channel.
Add Channel
Then press the VOL UP button on the front panel to add the selected channel. The channel number changes from yellow into green after adding the channel.
Erase Channel
Then press the VOL DOWN button on the front panel to erase the selected channel. The channel number changes from green into yellow after erasing the channel.
Note
You can still access the erased channel by entering the channel number using the number buttons on the remote control. Use the Add Channel steps if the channel was erased accidentally.
51