12
Troubleshooting
Situation | Solution | |
|
| |
| • Connect the power cord properly. | |
| • Press the POWER button on the control panel | |
| or remote control. | |
| • Press the SOURCE button to cycle through | |
| connected video sources. | |
No picture and sound. | • Press the CH UP or CH DOWN button to switch | |
| to other TV stations. | |
| • Check the TV/CATV OSD settings. See “Taking | |
| Care of Your TV & Remote Control” on | |
| page 63. | |
| • Make sure all cables are connected properly. | |
|
| |
No picture, or poor picture, sound is | • Check the antenna and cable connections. | |
• Adjust the brightness in the OSD menus. See | ||
OK. | ||
“Brightness” on page 35. | ||
| ||
|
| |
| • Adjust the saturation in the OSD menus. See | |
Picture is not in color. | “Saturation” on page 39. | |
| • Make sure all cables are connected properly. | |
|
| |
| • Make sure the source device is functioning | |
| properly. | |
| • Make sure the audio cable is connected | |
| securely. | |
Picture is OK, no sound. | • Turn the mute off. | |
| • Press the VOL UP button on the control panel | |
| or remote control. | |
| • Make sure the MTS option is set to MAIN or | |
| MONO. | |
|
| |
| • Adjust the balance in the OSD menus. See | |
One of the speakers has no sound. | “Balance” on page 46. | |
• Make sure the audio cables are connected | ||
| ||
| securely. | |
|
| |
Cannot receive some TV channels | • Try the Auto Program function in the OSD “TV | |
Setting” menu. See “Auto Program” on | ||
using cable TV. | ||
page 52. | ||
| ||
|
| |
Want to reset TV settings. | • Use the Preset function in the OSD Picture and | |
Audio menu. | ||
|
64 
