Picture is OK, but | • Press the VOL UP or VOL DOWN key on the | |
no sound. | control panel or the remote control. | |
| • Make sure the MTS option is set to MAIN or | |
| MONO. | |
| • Make sure the source device is functioning | |
| properly. | |
| • Set the volume to a higher level. | |
| • Make sure the audio cable is connected | |
| securely. | |
| • Turn the mute off. | |
|
| |
One of the | • Adjust the balance in the OSD menus. | |
speakers has no | • Make sure the audio cable is connected | |
sound. | ||
properly. | ||
| ||
|
| |
Cannot receive | • Try the Auto Program function in the OSD TV | |
some TV channels | Setting menu. | |
when using cable |
| |
TV. |
| |
|
| |
Want to reset TV | • Use the Preset function in the OSD Picture | |
settings | and Audio menu. | |
|
| |
Cannot operate | • If OSD items are colored light blue, the | |
menus. | system is in a state such that those settings | |
| are not available. For example, video setting | |
| is available in TV mode. | |
|
| |
Screen image | • Make sure the video signal cable is | |
turns over. | connected properly. | |
|
| |
Snow appears on | • Adjust the location of the antenna, placing it | |
the screen. | far from roads or sources of interference. | |
| • Check the antenna and the video signal line | |
| connections. | |
|
|
57