D. Assemble the Chimney Sections

Attach either a straight chimney section or an offset to the top of the fireplace (depending on your installation require- ment). Chimney sections are locked together by pushing downward until the top section meets the stop bead on the lower section.

The inner flue is placed to the inside of the flue section below it. The outer casing is placed outside the outer casing of the chimney section below it. See Figure 22.1.

If you are using a different approved venting system, follow the instructions that were supplied with that system.

Figure 22.1 Assembling Chimney Sections

Note: Inner flue and outer liner sections cannot be disassembled once locked together. Plan ahead to ensure the proper installation height is achieved with the selected chimney components.

WARNING

Fire Risk

Do NOT install substitute or damaged chimney components.

•MUST use chimney system described in this manual.

•NO OTHER chimney components may be used.

Substitute or damaged chimney components may impair safe operation.

E. Assembling Chimney Sections for the SL- 300 Series

NOTE: Chimney Air Kit, Part CAK4A is required when using the SL-300 Pipe Series. Detailed instruc- tions are supplied with the kit.

Installing CAK4A and Flex Pipe

NOTE: FOLLOW DETAILED INSTRUCTIONS THAT COME WITH THE CAK4A.

1.Install the chimney pipe first.

2.Hand bend the tabs in position before placing on the fireplace.

3.Place the box on top of the fireplace around the chimney pipe, push both pieces together and secure with screws provided.

4.Use the pre-punched holes in the tabs as guides and drill holes through the fireplace top.

5.Secure the CAK4A in place.

6.Seal around the kit at the flue and at the top of the can with caulk.

Attach

Flue First

Secure with Screws

Provided

CAK4A

Push Together

Secure to Top

Figure 22.2 Installing the CAK4A

NOTES:

1.The outside termination cap must be a minimum of 6 ft (1829 mm) above the ground and kept free of debris.

2.If the CAK4A is installed in a chase, the CAK4A side termination cap must be at least 3 ft (914 mm) below the chimney top.

3.Seal around the cap and flex with caulk to stop air from getting in to the chase (See Figure 23.1 on page 23).

WARNING

Fire Risk

•The flex hose must never be compressed or deformed!

Page 22

Heatilator • Constitution EPA Fireplace • 480-1091C

November 11, 2008

Page 21 Page 23
Page 22
Image 22
Hearth and Home Technologies C-40 Assemble the Chimney Sections, Assembling Chimney Sections for the SL- 300 Series
Page 21 Page 23

C-40 specifications

Hearth and Home Technologies (HHT) has long been known for its commitment to innovation and quality in the heating and home comfort industry. One of their standout offerings is the C-40, a versatile and efficient gas fireplace that embodies the brand’s dedication to modern aesthetics and advanced technology. This fireplace is designed to not only provide warmth but also enhance the ambiance of any living space.

The C-40 features a sleek, contemporary design that can seamlessly fit into various interior styles. Its clean lines and minimalist frame allow it to serve as a stylish focal point in a room, while offering the functionality and performance that homeowners expect from a high-quality gas fireplace. The unit is available in various configurations, including built-in and wall-mounted options, allowing for flexibility in installation and design.

One of the most notable features of the C-40 is its impressive heat output. With the ability to deliver efficient and evenly distributed warmth, this gas fireplace can effectively heat spaces of various sizes, making it an excellent choice for both small and large rooms. The adjustable flame height feature further enhances the user experience, allowing homeowners to customize their heating preference and create the perfect atmosphere for any occasion.

The C-40 is equipped with cutting-edge technologies, including electronic ignition and a remote control system, making it convenient and easy to use. The electronic ignition ensures quick and reliable startup, while the remote control allows for effortless temperature and flame adjustment from anywhere in the room. This added convenience is a significant benefit for those who value comfort and ease of operation.

Additionally, the C-40 incorporates advanced safety features, such as an automatic shut-off and a secure glass front, providing peace of mind for families. The glass front not only enhances safety but also serves to display the mesmerizing flames beautifully, allowing everyone to enjoy its warmth and glow.

In summary, Hearth and Home Technologies’ C-40 is a prime example of combining stylish design with modern technology and efficiency. Its exceptional heat output, customizable features, and advanced safety measures make it a standout choice for homeowners looking to enhance their living spaces with a dependable gas fireplace. Whether for cozy family gatherings or quiet evenings at home, the C-40 offers both aesthetic appeal and functional excellence, ensuring it remains a popular choice in contemporary home design.
Top Page Image Contents